Thglimited - Heavy Industries

Good Vs. Evil Foosball Table from 20ltd.

PhD: Development of a Surgical Force & Motion Analysis System
Delft, (Zuid-Holland), 38 hours per week Delft University of Technology

Job description
Minimally invasive surgical techniques require special manual skills. Accurate control of the surgical instruments is of utmost importance for dexterous performance and patient safety. To obtain automated assessment of dexterity, registration of instrument motion and forces is necessary. Combining motion analysis with an analysis of the forces enables the development of metrics and feedback systems to support the surgeon. In this project, the PhD student will integrate motion capture of the surgical instruments with force sensing into one measurement system, as well as develop analysis tools for assessment of skills in surgical tasks. The developed measurement and analysis tools should finally result in the clinical implementation of a surgical training system. The international nature of the research offers opportunities to travel and to work abroad. An applicability orientation is reflected by the department’s support to start-up companies.

The project is funded by Medical Delta - Health, Science & Technology (www.medicaldelta.nl), a consortium of Delft University of Technology, Erasmus University Rotterdam, Erasmus University Medical Centre Rotterdam (Erasmus MC), Leiden University and Leiden University Medical Centre (LUMC). The research is conducted in close collaboration with LUMC and covers one clinical PhD student at LUMC and one in Biomechanical Engineering at DUT.

Requirements
University Graduate
The Department of Biomechanical Engineering is looking for outstanding engineers with an M.Sc. degree in mechanical engineering, electrical engineering and/or biomedical engineering. The candidate should have a broad interest in mechanical design and sensor technology, preferably with experience in the field of human-machine interaction. Experience in programming languages such as Matlab or C++ is a requisite. The candidate must have an affinity for working in the medical field.

Organization
Delft University of Technology Biomechanical Engineering
Delft University of Technology is a multifaceted institution offering education and carrying out research within the technical sciences at an internationally recognized level. Education, research and designs are strongly oriented towards applicability. TU Delft develops technologies for future generations, focusing on sustainability, safety and economic vitality. At TU Delft we work in an environment where technical sciences and society converge. TU Delft comprises eight faculties, unique laboratories, research institutes and schools.

The Department of Biomechanical Engineering coordinates education and research activities in the field of mechanical engineering techniques, including modeling and design, to analyze the interaction between medical, biological and technical systems. An important aspect of the research topics is how surgeons control their instruments during complex surgical procedures. For more information see www.misit.nl.

Conditions of employment
Estimated maximum salary per month: eur 2500 - 3000
Maximum salary amount in Euro's a month 2558
Employment basis: Temporary for specified period
Duration of the contract: This position has a temporary employment basis of four years (48 months).
Maximum hours per week: 38

Additional information about the vacancy can be obtained from:
drs. I.M.J.M. Emmerik
Telephone number: 015- 27 85894
E-mail address:

Or additional information can be obtained through one of the following links.
* Technische Universiteit Delft (www.tudelft.nl)

You can apply for this job before 21-03-2008 by sending your application to:
Prof. Jenny Dankelman/Biomechanical Engineering
E-mail address: application-3mE@tudelft.nl

When applying for this job always mention the vacancy number 3mE08.01.

Associate Engineer

Experience :  0 - 1 Years

Education : UG - B.Tech/B.E. - Any Specialization
                PG - Post Graduation Not Required

Job Description : Day to day supporting function in which ever department allotted then. Working on short term assignment small project during the year.

Desired Profile : Graduates in Mechanical, Automobile, Production, Industrial, Instrumentation, Electrical and Electronics Engineering. The candidate should have scored at least 55% aggregate marks.
Experience 6 months to 18 months (Post completion of Degree Engineer course).

Walk-in selection process at:
Tata Motors Ltd,
Human Resource Division
Passenger Car Business Unit
K-Block, Indica Main Gate
Near Chikhali RTO, Pimpri
Pune - 410501

On 03.02.2008, Sunday
Registration will be on from 10 am to 4 pm

Candidate already appeared for an interview in Car Plant, need not appear for this process.

Candidates with more or lesser experience than stipulated need not report for the selection process.

No reimbursement /payment towards traveling or other expenses will be made for attending the interview.

The process may take entire day.

Candidate should bring following documents along with them while appearing this walk-in interview:
Two latest passport size photographs - MUST
Latest salary slip or proof of salary.
Two copies of updated resume.
Details of year-wise academic credentials.
A photo copy of driving license or pen card.

Candidate unable to attend interview on this day may send their detailed CV in word format on mail id , where the subject should be mentioned as 'Associate Engineer'.

Location :  Pune

Keywords   Mechanical, Automobile, Production, Industrial, Instrumentation, Electrical and Electronics Engineering

By François Delarozière and Pierre Oreficee, giant mechanical animals are exhibited at Nantes, France. Including the elephant, a squid and a manta ray. Site HERE.

I have an update on the ball bowling machines at the Krow's nest. They have just brought in another machine which brings them up to 6 large ball bowlers and one puck bowler for a total of 7 machines. The new machine is not ready to play yet and it will probably be a while before it is since it has to be restored before it can be enjoyed by the public. Here is a video showing the insides of the machine (holy crap its complex inside!). I will be keeping all the readers updated on the restoration of this wonderful machine with updates when they occur.

Parker's Electromechanical Automation Division has released MPP motor options for the HPLA and HLE configurables. Designed for demanding applications in high-performance servo systems, MPP motors offer lower inertia and higher power, all in a smaller package than conventional motors. The addition of these motors to the HPLA and HLE belt-driven product configurables makes creating a complete system, from actuator to gearhead to motor, easier than ever.

The configurable option includes mounting flanges and pinions for the MPP motors to be easily mounted in the field, or customers can save time and have the motors mounted directly at Parker. Parker still provides mounting hardware for thousands of different motor models and manufacturers. Parker has also released new feature of the HLE60 to match the HPLA product line feature set.

The HPLA and the entire HLE family offer easy belt tensioning implemented at the idler end of the actuator. This allows belt tensioning to be done without removing the load. Maintenance time is reduced and the machine will be up and running in no time with this easy-to-tension design style. This feature, coupled with the direct-mount gearbox design on the HPLA and the complete HLE family, reduce overall cost of ownership by as much as 20%.

'The new HLE60 design is just like the HPLA family with a belt tension station at the idler end of the actuator instead of the carriage', says Ben Furnish, Product Manager. 'The pulley on the motor end can now be mounted directly to the gearbox shaft instead of using couplings, again like the HPLA, and we have implemented standard configurables for the MPP motors on the HPLA/HLE family'.

Velocity Consultants

Velocity Consultants is an established Oil & Gas recruitment company based out of India. Our clients are well known EPC companies in the Oil & Gas sector. Our clients are spread across India, SE Asia, Middle East, Japan and Africa. We are looking for highly talented and experienced professionals for one of our prestigious clients in the following areas:

1. PROCESS ENGINEERS:
2. MECHANICAL ENGINEERS (ROTATING/STATIC EQUIPMENT)
3. ELECTRICAL ENGINEERS
4. STRUCTURAL ENGINEERS (Steel Structure design with SACS knowledge)
5. ELECTRICAL ENGINEERS
6. PIPING STRESS ENGINEERS
7. NAVAL ARCHITECTS
8. PIPELINE ENGINEERS
9. PDMS ADMINISTRATORS

For all the above positions a person should have minimum 10 yrs. of design experience in designing offshore platforms with knowledge of relevant design software. Past experience of working in an EPC company will be an added advantage.

( CLICK FOR MORE DETAILS... )

PT. Millenium Muda Mandiri

CAREER OPPORTUNITIES
IN THE OIL & GAS CONSTRUCTION

We are seeking qualified and experienced people to challenge career overseas. These are Senior and Principal Engineer in various engineering disciplines that require a minimum of 8 years of relevant experience respectively to fill positions as a:

1. Process Engineers
2. Mechanical Engineers
3. Piping Engineers
4. Electrical Engineers
5. Instrument & Control System Engineers
6. Civil Engineers
7. Architecture Building Engineers
8. Commissioning Engineers
9. HSE Engineers
10. Quantity Surveyors/ Contract Administrators
11. QC Inspectors/ Engineers – Welding
12. QC Inspectors/ Engineers – Painting/ Coating
13. Foreman/ Supervisor – Piping
14. Foreman/ Supervisor – Fabrication
15. Foreman/ Supervisor – Welding
16. Plumbing & Fire Fighting
17. Electrical Draughtsman
18. Plumbing Draughtsman
19. Mechanical Draughtsman
20. Millwrights
21. Fabricators
22. Pipe Fitters
23. TIG Welders

General Requirement
• Male Max 45 years old
• Graduated of Bachelor Degree in Engineering, Electrical, Civil & Chemical, Petroleum (Point 1 to 10)
• Min. 8 years having experience in Oil & Gas Project and Construction (Point 1 to 10)
• Having knowledge in HVAC, Electrical, Drainage, Water Supply, Fire Fighting workshops drawing for site execution
• Competence in engineering drawings, computer based drawing packages such as AUTOCAD
• Good personality, attractive and good command in English.

( CLICK FOR MORE DETAILS... )

Monroe Consulting Group

Monroe Consulting Group is a global team of recruitment specialists, boasting a network of over 40 offices located throughout Europe, USA, Asia and Australia. Our office located in Jakarta, works with some of the best-known local and multi-national companies to deliver consistently high levels of service and delivery within Middle to Senior Management recruitment.

Our Client, a Major Oil and Gas Company is seeking for people to join their project in Indonesia. The requirements are as follow:

STATIC MECHANICAL ENGINEER

Qualification:
- Min. 10 years experience.
- University degree in Mechanical Engineer
- Recognised strengths in Static Mechanical engineer.
- Experience in Offshore projects
- Strong experience in checking Mechanical/Piping Layout Drawing, Pipe Supports, Isometric
- Familiar in the use of Oil and Gas Standard: API, ANSI, ASTM, JIS, ASME etc.
- Experience in checking mechanical/piping layout drawing, pipe support, Isometric
- Understand and able to work on the mature field project.

( CLICK FOR MORE DETAILS... )

The National Contractor

The National Contractor held contract with Oil and Gas Company with Offshore and Onshore base needed candidate,

1. Field Manager (FM)

2. Project Engineer (PE)

3. Superintendent (S)

4. Mechanical/ Piping Engineer (MPE)

5. Coating Engineer (CE)

6. Lead/ Spv. Mechanical, Piping, Construction, Blasting Painting (LSM)

7. Lead Rigger & Rigger (LR)

Qualifications:
- Item 1, 2, 3, 4, 5, exp. Min. 5 – 10 years in welding, pipeline, construction, project management, S1 Technic Bachelor degree in Mechanical/ Structural Engineering max. 40 years old
- Item 6, 7, exp. Min. 5 - 10 years relevant work experience on/ offshore Oil & Gas construction project

( CLICK FOR MORE DETAILS... )