Archive for February, 2008

Designation: Management Trainee - Customer Quality Engineering

Experience: 0 - 2 Years 

Education : B.Tech/B.E. - Mechanical, Production/Industrial
PG - Any Specialization 
 
Job Description :Field Quality problem countermeasure promotion activities.
Quality Assurance system audit and improvement
Basic understanding of manufacturing process
Good technical knowledge
 
Location: Bengaluru/Bangalore
 
As a joint venture between Kirloskar Group and Toyota Motor Corporation, Toyota Kirloskar Motor Private Limited (TKM) aims to play a major role in the development of the automotive industry and the creation of employment opportunities, not only through its dealer network, but also through ancillary industries.

Contact Toyota Kirloskar Motor Pvt Ltd
 
Website
http://www.toyotabharat.com

APPLY : CLICK HERE toapply

Essar Oil Ltd. (EOL) is emerging as a leading integrated oil and gas company spanning the entire value chain, from deep within the earth all the way to the end-consumer. We have exploration and production (E&P) rights in some of India’s most valuable oil and gas blocks. EOL is building a state-of-the-art refinery and a countrywide network of modern retail fuel outlets.

Designation :Graduate Engineer Trainee
 
Job Description :B.E. in Chemical or Mechanical or Electrical or Instrumentation or Civil or Piping
 
Desired Profile : Fresh B.E.

Experience :0 Years 

Education : B.Tech/B.E.Chemical, Civil, Electrical, Instrumentation, Mechanical, Petroleum

Location: Vadinar , Jamnagar 

Contact bhavanay(at)essar.com
 
Website http://www.essar.com

APPLY : CLICK HERE to apply

Experience:0 - 5 Years

Location:Chennai

Desired Candidate Profile: B.E.- Civil, B.E Mechanical & M.E. Structural

Job Description : 1.Fresher Basic concepts should be good. RCC & steel designSTAAD is an added advantage.

2.Experience Should have experience in connection design, Strong in concepts and technically sound in various International code like ASD, LRFD AISC, BS 5950, EURO CODE EC3 & IS 800. Knowledge in Softwares like Descon, Prokon and Mathcad etc.,
 
Company Profile: Prothious Engineering Services is one of the largest and most successful Steel Detailing services, Steel detailing company in the world.. It is a US Based Company and more than thousand people working here.

Contact Details

Company Name:Prothious Engineering Services

Website:http://www.prothious.com

APPLY : CLICK HERE to apply

SANAT SAZAN

February 29th, 2008

project-pic1.jpg productdivice04.jpg productdivice022.jpg

 

SANAT SAZAN

PRODUCER OF MARINE AND INDUSTRIAL GEAR BOX

گروه صنعتی صنعت سازان

تولید کننده جعبه دنده های صنعتی و دریایی

WEB : www.asiahelicalgearbox.com

General Manager : M. BORHANI

Products :

  • MULTI STAGE COAXIAL GEAR BOX , RATIO RANGE 10 TO 500 , POWER RANGE 10 TO 50 KW
  • MULTI STAGE PARALLEL GEAR BOX , RATIO RANGE 10 TO 500 , POWER RANGE 70 TO 130 KW
  • MARINE GEAR BOX WITH COOLING SYSTEM AND BUILT IN THRUST BEARING , RATIO RANGE 2 TO 5 , POWER RANGE 50 TO 300 KW

Contacts: TEL : +98311 664 2476 , +98311 386 2075 +98312 564 3367

FAX : +98311 662 2239 , +98311 386 0026 +98311 564 3369

Mail: orders@asiahelicalgearbox.com

 

 


Okay, I know it sounds like a stretch, but stick with me on this one.Yesterday morning I had a flat tire when I woke up. Not the best thing to happen right before a big day of riding, but completely fixable right? So I flipped the bike over, removed the wheel, got the tube out, patched it and put everything back together. Everything that is except two greased up ball bearings that were sitting on the floor when I flipped the bike right side up again. Excuse me? Ball bearings? Some how they had escaped from my hub…but the dust cap was completely tightened. No small holes visible where they could have escaped either. How the what?!?So this is where the leprechaun comes in. Having no logical idea of how the bearings could have escaped we have decided that there is a leprechaun living inside of my frame who magically popped them out. He also may have been responsible for the loosening of my bottom bracket last week, though I will not go so far as to say he broke my shifters. Those were just crap quality.

As my bike is definitely not made of gold, you may ask how a leprechaun came to live inside of it. I think perhaps he is a distant relative of Bob, the miniature size man who lives in my knee (also known to less “creative” people as a donor ACL replacement ligament). As he’s obviously ticked by the lack of gold, I have stuck a moneda - a one peso coin - on the front of the head tube as that is where Ben thinks he lives. Hopefully this will appease him and no other parts will mysterious fall off.

PENGEMBANGAN PEMBANGKIT THERMOELEKTRIK DENGAN MEMANFAATKAN PANAS GAS BUANG MOTOR BAKAR UNTUK KENDARAAN HYBRID

 Oleh: Nandy Putra dan Raldi A. Koestoer

Penelitian ini berkaitan tentang pemanfaatan energy panas yang terbuang pada kendaraan bermotor yang akan dijadikan energy listrik. Konsep yang digunakan adalah konsep Seebeck. Apabila terdapat dua sumber temperatur yang berbeda pada dua material semi konduktor makan akan mengalir arus listrik pada material tersebut. Konsep ini lebih dikenal dengan pembangkit termoelektrik. Pada penelitian ini, konsep termoelektrik akan diaplikasikan pada mobil hibrida. Kemudian sumber temperatur tinggi pada penelitian ini adalah gas buang kendaraan bermotor yang berkisar antara 200-300oC sementara sumber temperature rendahnya adalah lingkungan yang berkisar 30-35oC. Energi yang dibangkitkan kemudaian akan disimpan di dalam baterai atau langsung digunakan untuk menggerakan motor listrik pada kendaraan hybrid. Pada penelitian terdapat 4 tahapan yakni karakteristik distribusi temperatur gas buang, karakteristik termoelektrik, rancangan bangun pembangkit termoelektrik dan uji unjuk kerja prototype yang dihasilkan. Hasil penelitian ini diharapkan dapat mengurangi konsumi bahan bakar minyak untuk kendaran bermotor dan juga mengurangi emisi gas buang ke lingkungan.

Mechanical Engineering is Concerned with Mechanics,” broadest of all Engineering offshoots which deals with Mechanical processes, Mechanical skills, Mechanical designs or arts etc. Read the rest of this entry »

WSEAS http://social.wseas.org/

February 27th, 2008

Instructions  after the WSEAS Conferences in Trinidad and Tobago








Additional Publication of the BEST PAPERS in JOURNALS (DEADLINE December 31, 2007)
       --------------------------------------------
INTRODUCTION: You know that our goal is to maintain very strong
international journals, to increase the impact of our beloved WSEAS
Transactions, really top journals as they really are. To this end, we need
only high quality papers, breakthrough works of archival value, i.e. papers
that are well written from any point of view, completed studies (with their
numerical examples or experiments that must be compared with the previous
results in the literature), excellent english and of course correct WSEAS
format. The papers also must be substantially extended version of the paper
that was presented in the conference (with more than 40% new material). We
need papers that will attract the attention of other scholars citing them
increasing our impact. In the next few years, the WSEAS transactions must be
in every academic library, in every corner of the earth. To this end, we
need your high quality contribution.





HOW TO PROCEED:
  a) Check very carefully if your idea is really important,
breakthrough in your field and can appear in a Journal of the quality
and the level of the WSEAS Transactions. If you doubt, do not send it
so easily. Your paper must not be only a good idea. It must be a complete
study with theoretical background, complete bibliographical references;
without grammatical and syntactical errors.
For theoretical works: full comparison with previous published papers is
necessary. We need numerical examples, applicability of the method,
originality, novelty and directions for future research. For
experimental or computational works: full comparison with previous published
papers is necessary. We need real experiments with the necessary
documentation, while for computational work, we need full benchmarks. Of
course along discussions for the applicability of the method, originality,
novelty and directions for future research.

  b) Complete the extended version of your paper until December 31, 2007
  and upload it until December 31, 2007 using this web form:
XXXXXXXXXXXXXXXXXX (the link was given only to authors that present a paper)

  The reason that we are giving so much time is that we need very good
  enhanced and extended versions.

  c) If the Editor verify that you fulfil the requirements of the paragraph
a), then he will send it to 3 independent Reviewers outside your country.
The positive answer of the 3 reviewers is necessary (i.e. 2 yes and 1 no
implies NO, rejection).

 d) Our Editor will collect the reviewers' remarks and will
send them again to you for acceptance/ acceptance after minor revision
acceptance after major revision /  rejection

 e) Possibly new rounds of review will be needed

 f) No additional fee is needed in case of acceptance.

 g) Some authors (fortunately very few for the WSEAS Congresses) that did
not show up in the conference to present their paper
are not eligible to send extended versions.

The final list of the papers must have the approval
of the Editor, 3 Reviewers, and of course the Editor-in-Chief of the
particular Journal. i.e. 5 persons: 3 Reviewers, Guest Editor and the
Editor-in-Chief of the particular Journal.

Specific Instructions:
-----------------------
In the web form:
XXXXXXXXXXXXXXXXXX (the link was given only to authors that present a paper)
you must fill in additionally:
i) Exact Title of your paper in the Conference Proceedings:
ii)The ID number of your paper in the Conference Proceedings: (If you do not
remember it, see the program of the conference or the CD-ROM Proceedings)
iii) A Password:
XXXXXXXXXXXXXXXXXX (the password was given only to authors that presented a paper)

Be careful, the password is given to you now in order to be sure
that ONLY registered and presented papers could be upgraded
to WSEAS Journals' papers (after new rounds of additional review)

P.S. Do not forget the same conferences of the next August (2008). See the
Web.
P.S.2   Do not send , simultaneously the same paper to WSEAS Journals
and Springer Verlag. 

 By the way, see:
http://social.wseas.org/

"The WSEAS Philanthropy proves the social profile of the Society" (WSEAS President)
Letter from Mr. PETROS MOLYVIATIS, Minister of External Affairs and President of Fire Victims... http://social.wseas.org/ See also here...http://social.wseas.org/
Who is Mr. PETROS MOLYVIATIS: http://en.wikipedia.org/wiki/Petros_Molyviatis

The WSEAS is a real non-for-profit organization with several acts of donating money, goods, time (see below).
WSEAS efforts are extended to support a charitable cause, usually over an extended period of time and in regard to a defined objective. In a more fundamental sense, the WSEAS philanthropy may encompass any altruistic activity which is intended to promote good or improve human quality of life. The WSEAS does not discriminate people according national, racial, religious, and class differences. WSEAS snuggles all the nations, cultures and religions as you can see below:

WSEAS Social Profile:
Donation of 50000 EURs to the victims of the big massive forest fires in several areas across Greece (Summer of 2007)
http://social.wseas.org



Experience:0 - 3 Years

Location:Chennai, Mumbai

Education:UG - B.Tech/B.E. - Automobile, Mechanical PG - Any PG Course - Any Specialization

Job Description: Undertake business to business research, author expert market studies, develop new research titles
Work directly with clients on customised consulting projects

Desired Candidate Profile: Excellent communication, analytical and writing skills
Strategic thinking, commercial awareness and an enquiring mind
An interest or experience in market research, consulting, marketing and/or journalism

Company Profile: Frost & Sullivan was founded in 1961 in New York City with a specific mission: Provide world-class market consulting on emerging high-technology and industrial markets.
 
Contact Details

Company Name:Frost & Sullivan

Website:http://www.frost.com

APPLY : CLICK HERE to apply

Experience:0 - 2 Years

Location:Delhi

Education:UG - B.Sc - Computers, Maths;B.Tech/B.E. - Computers, Mechanical PG - MCA - ComputersI

Job Description: Selected candidate will be working with our software product development teams as team member on projects for our international clients
 
Desired Candidate Profile: 0 to 2 years experience in CAD customization
Strong in VB .net and C++
Good communication and analytical skills

Company Profile: VEST, Inc. is a leading worldwide commercial provider of design and sales automation software for the engineering and fluid power industry. VEST is focused on knowledge-based solutions, and does innovative application development and customization.

Contact Details

Company Name:Virtual Engineering Services (P) LTD

Website:http://www.VESTusa.com

APPLY : CLICK HERE to apply